ii
750-204
Profire D/LND
2.2 — Combustion Chamber Construction 2-1
2.3 — Installation 2-4
2.4 — Packing Plastic Refractory Around Oven 2-5
2.5 — Separate Compressor Module 2-5
2.6 — Typical Oil Supply Loop 2-6
2.7 — Oil Circulating Loop Operation 2-7
2.8 — Circulating Oil Pump 2-8
2.9 — Oil Loop Heater 2-8
2.10 — Burner Mounted Trim Heater 2-8
2.11 — Back Pressure Valve 2-8
2.12 — Gas Piping 2-9
2.13 — Installation Checklist 2-9
CHAPTER 3 Operation 3-1
3.1 — Preparations for Starting 3-1
3.1.1 — Oil Flow 3-2
3.1.2 — Oil Pressure 3-2
3.1.3 — Oil Temperature 3-2
3.1.4 — Air-Oil Tank (Lube Oil) 3-3
3.1.5 — Firing Preparations for Gas Burners 3-3
3.2 — Electrical Interference Test 3-3
3.2.1 — Gas Fired 3-3
3.2.2 — Oil Fired 3-3
3.3 — Gas Pilot Flame Adjustment 3-4
To Next Page
Loading...
Need help?
General