CleaverBrooks ProFire D Series - Page 111

750-204
Profire D/LND
9-11
9.4 — Parts Lists and Drawings
Blower Housing Assemblies Quantity
Item
No.
Part No. Description 210 252 300 315 336
1 894-1249 Motor, 20 HP S
894-1251 Motor, 25 HP PS
894-1255 Motor, 40 HP p S&P
894-1351 Motor, 60 HP 11
2 515-16 Seal 111
3 39-452 Shroud Assembly, Air Hood 1 1 1 1 1
4 85-812 Support, Motor and Air Damper S S
85-813 Support, Motor and Air Damper P111
5 91- Spacer (varies)
6 192-308 Impeller Assembly 21-1/2” O.D. X 2-1/2” Wide X 1-5/8” Shaft S
192-299 Impeller Assembly 23” O.D. X 2-11/32” Wide X 1-5/8” Shaft P S
192-307 Impeller Assembly 23-1/2” O.D. X 2-9/32” Wide X 1-5/8” Shaft P
192-321 Impeller Assembly 25-1/2” O.D. X 2-5/8” Wide X 1-5/8” Shaft S&P
192-306 Impeller Assembly 25-1/2” O.D. X 3-9/32” Wide X 1-5/8” Shaft 1 1
7 869-185 Nut, Hex Lock 1-3/8” 12 UNF 1 1 1 1 1
8 152-17 Pad, Blower Motor MTG. 2-1/4” O.D. X 1/2” I.D. X 1/8” THK. 4 4 4
9 836-366 Switch, Air Pressure 11111
10 85-878 Support Assembly, Damper to Motor P S&P 1 1
11 152-18 Pad, Motor Support 1-3/4” Wide X 6” LG. X 1/8” THK. *4 4 4 4
12 265-26 Cone Assembly, Stator 1
265-25 Cone Assembly, Stator 111
265-135 Cone Assembly, Stator 1
13 19-520 Cover, Access, Fan Housing 11
14 914-205 Ring, Retaining Ext. Snap 22222
15 56-276 Pin, Hinge 1
52-278 Pin, Hinge 1111
16 835-001 Insert, Coil 88888
17 43-13 Latch, Toggle Clamp 22222
18 40-257 Housing Assembly, Fan 1
40-264 Housing Assembly, Fan 11
40-383 Housing Assembly, Fan 1
40-144 Housing Assembly, Fan 1
19 32-1060 Gasket, Fan Housing Seal 11111
*252P