ment shall be connected to flues having sufficient draft at all times to assure safe and proper opera-
tion of the burner.
The D Series burners are designed to burn either gas or light oil No. 1 or 2 as defined by ASTM
D396-1978 specifications, and heavy oils.
Do not use gasoline, crankcase oil, or any oil containing gasoline.
Gas input based on natural gass at 1,000 Btu/cu. ft. and 0.60 specific gravity.
Burner Size Max. Burner Gas Input MBTU/hr.
60hz 50hz
42 (S or P) 4,200 3,360
54 (S or P) 5,400 4,200
63 (S or P) 6,300 5,250
84 (S or P) 8,400 6,300
105 (S or P) 10,500 8,400
145 (S or P) 14,500 10,500
175 (S or P) 17,500 14,700
210 (S or P) 21,000 16,800
252 (S or P) 25,200 21,000
300 (S or P) 30,000 25,200
315 (P) 31,500 30,000
336 (P) 33,600 31,500
378 (P) 37,800 33,600
420 (P) 42,000 37,800
To Next Page
Loading...
Need help?
General