750-204
Profire D/LND
5-5
5.7 — Oil Nozzle
5. Hold the nozzle body in a vise or use two wrenches, one on the body and one on the tip.
6. Disassemble the nozzle tip.
7. Carefully clean all parts in solvent and reassemble the nozzle.
To insure proper atomizing, the tip must be screwed in tightly with the swirler seating spring pressing the swirler
tight against the nozzle tip. Turn the swirler a few times to be sure it fits snugly in the nozzle and the spring is
pressing the two parts firmly together. When reinstalling, be surer the nozzle is centered with the proper distance
from the diffuser (see Figures 5-2 and 5-3).
FIGURE 5-5. Oil Nozzle Assemblies
To Next Page
Loading...