10
Figure 13
Step 3
If the vehicle seat back is adjustable, make
sure the seat back is locked in a more upright
position. Refer to vehicle owner’s manual for
recommended seat back angle. DO NOT
install or use this car seat while the vehicle
seat back is excessively reclined, as shown
in Figure 13.
Step 4
Remove Tether Hook from its storage location
on back of car seat. See “Top Tether
Storage” in your car seat manual.
• Lengthen Top Tether belt by pressing
and holding Tether Adjuster while
pulling strap as shown in Figure 14.
• Place Tether Hook in the seat of the
car seat.
Figure 14
Step 2
Select a Forward-Facing vehicle seating
location which has a vehicle belt which
can be used with this seat and a top tether
anchor point as shown in Figure 12.
Figure 12
To Next Page
Loading...
