13
• Open the Forward-Facing Belt Lock-
off on the same side of the seat as the
vehicle shoulder belt anchor point. Place
the vehicle shoulder belt through the
Forward-Facing Belt Lock-off as shown
in Figure 17.
Step 8
Place car seat in the seating location selected
with the Rigid LATCH Connectors facing the
vehicle seat.
Secure the Rigid LATCH Connectors to the
vehicle LATCH lower anchors by aligning
the Rigid LATCH Connectors with the vehicle
LATCH lower anchors and pressing the Rigid
LATCH Connectors against the LATCH lower
anchors until each Rigid LATCH Connector
locks, as shown in Figure 18.
Figure 17
Figure 18
To Next Page
Loading...
