24
Figure 37
Step 7
Route vehicle belt through the Forward-
Facing Belt Path, taking care not to put
vehicle belt between Harness and back of
seat, and buckle vehicle belt, as shown in
Figure 37.
Step 8
Open the Forward-Facing Belt Lock-off on the
same side of the seat as the vehicle shoulder
belt anchor point. Place the vehicle shoulder
belt through the Forward-Facing Belt Lock-off
as shown in Figure 38.
Step 9
Check that the entire belt is laying flat,
placed correctly in the Forward-Facing
Belt Path as shown in Figure 39 and NOT
between the Harness and seat.
Figure 39
Figure 38
To Next Page
Loading...
