18
Step 3
Press the UAS Connectors
against the UAS lower anchors
until you hear each UAS
Connector click, as shown in
Figures 12 and 13.
If UAS Connectors fail to connect to the UAS lower anchors, you can still use this
seat by securing the vehicle seat belt under neath the armrests. See section titled
“Installing Booster Seat in Vehicle With out Using UAS Connectors”. However,
please notify us if the Connectors fail to latch by calling 1-866-656-2462.
Step 4
Once the UAS Connectors are fully connected
to the UAS lower anchors, pull forward on the
booster seat to make sure it is securely attached,
as shown in Figure 14. If not, start over at Step 1.
click
click
click
Figure 12 Figure 13
Figure 14
To Next Page
Loading...
