20
Installing Booster Seat in Vehicle without
using UAS Connectors
Step 1
Select a forward facing
vehicle position which has
a lap and shoulder belt.
Position the booster seat
firmly against seat back
with UAS Connectors
tucked into the crease
between the seat back
and seat cushion, as shown
in Figures 16 and 17.
WARNING
NEVER leave this booster seat unsecured in your vehicle. This booster seat must
remain connected to the UAS lower anchors in the vehicle or secured by the vehicle’s
seat belt even when not in use. In a sharp turn, crash or sudden stop, an unsecured
booster seat can be thrown around and could severely injure vehicle occupants.
Figure 16 Figure 17
To Next Page
Loading...
