To Next PageTo Next Page
Need help?Do you have a question about the Clemco APOLLO 100 CE and is the answer not in the manual?
General| Brand | Clemco |
|---|---|
| Model | APOLLO 100 CE |
| Category | Motorcycle Accessories |
| Language | English |
Outlines the intended use, restrictions, and limitations of the Apollo 100 CE blast helmet.
The Apollo 100 CE blast helmet is designed for blasting operations and approved per DIN EN 14594:2018.
Details helmet's air supply, temperature limits, line length, pressure, and airflow requirements.
Discusses risks of lead-containing dust and other toxic substances in blasting operations.
Mandates wearing ear protectors when using the blast helmet.
Specifies replacement intervals for rubber components (5 years) and the helmet (10 years).
Emphasizes critical air quality, warns against incorrect connections and piston compressors.
Specifies required airflow, line length limits, and supply line pressure.
Provides step-by-step instructions for adjusting the helmet suspension for proper fit.
Step-by-step guide for removing and fitting the inner lens of the helmet.
Instructions for replacing the outer lens and multiple perforated cover lenses.
Refers to section 7.2 for the procedure to replace the helmet suspension.
Provides instructions for detaching and attaching the outer cape for cleaning or replacement.
Explains how to detach, replace, or wash the inner collar for hygiene.
Details when and how to replace the lens frame for seal integrity.
Advises replacing the chin strap when it becomes worn.
Covers securing screws and replacing the air line with proper tape application.
Instructions for removing and cleaning the foam filter within the control valve.
Guide for machine washing and drying the nylon cape.
How to clean the leather cape using a damp sponge.
Daily washing instructions for the inner collar to remove sweat and dust.
How to wash the sweatband, helmet suspension, and chin strap.
Recommends cleaning the helmet with a specific disinfectant.
When to replace the inner lens and how to clean it without solvents.
Instructions for hanging the helmet in a clean place during breaks or after work.
Guidance on packing the helmet in a sealed bag for protection during long-term storage.
Lists part numbers for the control valve and filter set.
Lists various helmet components and their article numbers.
Lists additional optional components like Clemcool and Climate Control.
