clevelandvibrator.com 4544 Hinckley Industrial Pkwy. Cleveland, OH 44109 800-221-3298 Fax 216-241-3480
FOR MORE INFORMATION
Call: Sales at 800-221-3298
Email: sales@clevelandvibrator.com
Buy Online: www.clevelandvibrator.com
PROBLEM PROBABLE CAUSE SOLUTION
Vibrator will not
operate
Poor electrical
connections
Check to make sure all electrical connections,
including ground connections, are secure and
free of corrosion. Check switch to ensure it is
making contact
Field/Armature is
locked up
Disconnect and check to make sure shaft turns
freely
Vibrator starts
but fails to
continue to
operate
Battery is low
Recharge battery. Keep engine running while
operating vibrator. Turn o other accessories
using battery
Brushes are worn Replace brushes in motor
Short circuit in motor
windings
Replace motor
Vibrator makes
too much noise
Inadequate mount
Be sure all mounting bolts are tight and that
mount is rigid and secure. Be sure all mounting
instructions are followed
Bearing failure
(squealing noise)
Replace bearings
Loose cover or motor
Be sure all bolts securing the cover and the
motor to the vibrator housing are secure
Troubleshooting
Warranty
Cleveland Vibrator Company industrial vibrators are warranted for 1 year from the date of
shipment, if the unit is installed and operated in accordance with the factory instructions. The
To Previous Page
Loading...