To Next PageTo Next Page
Need help?Do you have a question about the Cleveland DC and is the answer not in the manual?
Instructions for mounting vibrators on truck beds using channel iron, focusing on proximity to material flow issues.
Guidance on mounting vibrator orientation with the shaft horizontal for proper material flow direction.
Procedure for installing a single vibrator on a sloping wall, specifying stiffener placement.
Steps for installing three vibrators on a sloping wall at 120° intervals and specific distances from discharge.
Guidance on selecting and using multiple vibrators based on hopper diameter for optimal material flow.
Installation method for two vibrators on round or square hoppers, specifying placement and spacing.
Installation method for two vibrators on rectangular hoppers, detailing placement on long walls.
Specifies voltage, amperage, and maximum ambient temperature requirements for DC vibrators.
Advice for using vibrators on truck dump bodies, including engine running and accessory use.
Information on using a rheostat to control vibrator speed and enhance bearing life.
Detailed steps for connecting vibrators to power sources and switches, including voltage matching.
General| Brand | Cleveland |
|---|---|
| Model | DC |
| Category | Automobile Accessories |
| Language | English |
