Cleveland KEL-30 - User Manual

1333 East 179th St.
Cleveland, Ohio
U.S.A. 44110
Phone: (216) 481-4900 Fax: (216) 481-3782
Visit our web site at www.clevelandrange.com
SE95036 Rev. 2
Operators Manual
Installation, Operation & Service
Electric Floor Model Kettles
For units built after August 1999
MODELS:
KEL-25, KEL-30, KEL-40, KEL-40-SH, KEL-60, KEL-80, KEL-100
KEL-25-T, KEL-40-T, KEL-60-T, KEL-80-T, KEL-100-T
KEL-40-SH, KEL-40-TSH, KEL-60-SH, KEL-60-TSH

Summary

Kettle Installation and Setup

Clearance and Floor Drain Requirements

Kettle Assembly and Connections

Electrical Wiring Connections

Guidelines for connecting electrical supply according to codes.

Installation Checks and Initial Cleaning

Visual and Performance Installation Checks

Verifying proper installation through visual and operational tests.

Kettle Operation Overview

Kettle Operation Instructions

Detailed steps for operating the kettle, including controls and indicators.

Kettle Operation Details

Kettle Care and Cleaning

Service Parts and Warranty

Hand Tilt Control Console Parts

Hand Tilt Control Console Parts List

Power Tilt Control Console Parts

Power Tilt Control Console Parts List

Kettle Maintenance and Inspection

Periodic Inspection and Maintenance Checklist

Checklist for regular inspection of gaskets, covers, controls, and gauges.

Kettle Calibration and Testing

Kettle Calibration Procedure

Pressure Relief Valve Periodic Testing

Kettle Reservoir and Venting

Kettle Reservoir Fill Procedures

Kettle Venting Instructions

Kettle Leak Testing and Lubrication

Vacuum Leak Test Procedure

Repairing Kettle Jacket Leaks

Kettle Diagnostic Guide (Part 1)

Troubleshooting: Kettle Not Heating

Identifies causes and fault isolation steps for heating issues.

Fault Isolation for Heating Issues

Step-by-step tests to diagnose and resolve heating problems.

Kettle Diagnostic Guide (Part 2)

Troubleshooting: Slow or Insufficient Heating

Identifies causes and isolation steps for slow or low heating performance.

Fault Isolation for Heating Performance

Step-by-step tests to diagnose and resolve heating performance issues.

Kettle Diagnostic Guide (Part 3)

Troubleshooting: Kettle Overheating

Identifies causes and isolation steps for overheating conditions.

Troubleshooting: Red LED Remains On

Identifies causes and isolation steps for persistent red LED illumination.

Wiring Diagram (200-240 V)

Wiring Diagram (380-600 V)

Cleveland KEL-30 Specifications

General

Brand	Cleveland
Model	KEL-30
Category	Kettle
Language	English