08
SETTING UP BLACK LABEL CLEVERSPA
®
8
Inflation takes 2 minutes (approx).
Note: Drainage Outlet (T) should be
positioned on outside of the hot tub.
Use dual action hand pump (C)
to inflate. We recommend inflating
to between 7-11 PSI.
7
Once inflated turn anti-clockwise
to release inflation hose
and replace valve cap (W).
9
J
1
Lay groundsheet (J) on a flat, even
surface, clear of sharp objects.
Unpack CleverSpa
®
(A)
on groundsheet.
2
Remove protective plastic
from clips & connectors.
3
Assemble Hand Pump (C),
Pressure Gauge (E) & Hose (F).
Insert and twist until locked.
5
Locate Inflation Valve. Remove
valve cap (W). Connect hose (F)
turning clockwise to lock.
Central button MUST be up.
6
(P) Inflation Valve,
(Q) Air jet Connector, (S) Water Inlet,
(R) Water Outlet (T) Drainage Outlet.
P
R
S
Q
T
4
Align hoses with respective
connectors and screw into place.
Plug in, switch on.
11
Unpack external unit (B) screw
3x hoses (D) onto external unit
in order shown.
10
2
3
1
Inner features:
Water Circulation Outlet (U) Filter
Connector (V) Drainage Plug (K).
U
V
K
12
CENTRAL
BUTTON
POSITION
W
F
To Next Page
Loading...
