Clevo N850HP6 - Display Devices

23
English
Display Devices
Note that you can use external displays connected to the
HDMI-Out port and/or Mini DisplayPort. See your dis-
play device manual to see which formats are supported.
Configuring the Displays in Windows
All external and internal displays (up to 4 active displays)
can be configured from Windows by using the Display or
System (in Settings) control panel or the Project menu.
To configure the displays using the Project menu:
1. Attach your external dis-
play(s) to the appropriate
port, and turn it(them) on.
2. Press the + P (or Fn
+ F7) key combination.
3. Click on any one of the
options from the menu to
select PC screen only,
Duplicate, Extend or
Second screen only.
To configure the displays using the Display control pan-
el:
1. Attach your external display(s) to the appropriate port, and turn
it(them) on.
2. Go to the Control Panel.
3. Click Display (icon) and Adjust Resolution (Appearance and
Personalization).
4. Click the Detect button.
5. The computer will then detect any attached displays.
6. You can configure up to 4 displays from the Multiple Displays
menu.

4 Connected Displays
Note that when 4 displays are connected, only 2 displays
may be configured in Duplicate mode.
Figure 21
Project
Figure 22
Display (4 Connected Displays)