Clevo N850HP6 - Page 32

Disassembly
2 - 8 Removing the Hard Disk Drive
2.Disassembly
5. Remove screws from the HDD assembly (Figure 4d).
6. Slightly lift and pull the hard disk assembly in the direction of arrow
(Figure 4e).
7. Lift the hard disk assembly out of the bay (Figure 4f).
8. Remove screws - and bracket from the hard disk (Figure 4g).
9. Reverse the process to install a new hard disk (do not forget to replace the screws).
2
3
4
5
6
7
8
9
d.
6
3
g.
5
7
8
9

HDD System Warning
New HDD’s are blank. Before you begin make sure:
You have backed up any data you want to keep from your old HDD.
You have all the CD-ROMs and FDDs required to install your op-
erating system and programs.
If you have access to the internet, download the latest application
and hardware driver updates for the operating system you plan to
install. Copy these to a removable medium.
2
f.e.
4

4. HDD Assembly
8. Bracket
9. HDD
•2 Screws
Figure 4
HDD Assembly
Removal (cont’d.)
d. Remove the screws.
e. Slightly lift and pull the
HDD in the direction of
the arrow.
f. Lift the HDD assembly
out of the bay.
g. Remove the screws and
bracket from the HDD.