Clevo W550SU1 - Page 41

Disassembly
Removing the Wireless LAN Module and Keyboard 2 - 17
2.Disassembly
10. Remove screws - from the top case.
11. Remove screws - from the keyboard shielding plate (Note: when removing special screws - , you’ll
need to use an (#0 head) electric screwdriver - set to a low spin of 300r.p.m. and low torque at 0.1~1.5kgf.cm. The
Lock torque should be set to 0.35~0.45kgf.cm, and should not be exceeded or it may cause screw damage).
12. Carefully lift the keyboard shielding plate .
13. Carefully separate the keyboard from the top case (Figure 13k).
27
32
33
41
33
41
42
43
i.
j.
42
29
28
32
31
27
30
43
k.
33
37
34
38
35
39
36
40
41

42.Keyboard Shielding
Plate
43.Keyboard
•15 Screws
Figure 13
Keyboard Removal
(cont’d)
i. Remove the screws.
j. Lift the keyboard shield-
ing plate.
k. Separate the keyboard
from the top case.