14
CLEANING & MAINTENANCE (Cont.)
Changing the Honeycomb Filter Pads
The appliance is supplied with Honeycomb cooling / filters pads.
The cleaning frequency for the Honeycomb filter depends on local air and
water conditions. In areas where the mineral content of water is high
(hard water), mineral deposits may build up on the honeycomb cooling
filter and restrict air flow. If mineral deposits remain on the Honeycomb
pads, the filter should be removed and washed under fresh water. For a
deeper clean a mild detergent should be used with a soft brush. Once
cleaned the filter should be rinsed in clean water before leaving to dry.
We recommend cleaning the honeycomb filter at least every two months,
depending on your needs. For best resul ts, allow the honeycomb filter to
dry after each use by turning o the COOL function and running the unit as
a fan for 15 minutes before turning the unit o.
To Next Page
Loading...
