32
© 2004 directed electronics, inc.
➤ Full trigger response
3300
or 60 seconds: This determines how
long the full triggered sequence lasts. Some states have laws
regulating how long a security system can sound before it is
considered a nuisance. If your installer is programming the
security system with the Directed Bitwriter, the full triggered
response can be programmed for any duration ranging from
1 to 180 seconds.
➤ Nuisance Prevention
®
Circuitry
oonn
or off: Please refer to the
NPC
®
section of this manual for a complete explanation of
how NPC
®
operates. If NPC
®
is programmed off, the secu-
rity system will respond to inputs from any sensor indefi-
nitely.
➤ Progressive door trigger
oonn
or off: When the system is armed
and a door is opened, the system responds with ten chirps
prior to beginning the full triggered sequence. If an instant
trigger is desired, the progressive door trigger can be pro-
grammed off.
➤ Valet pulse count: The number of presses of the Valet button
required to disarm the security system, AED, or the VRS
®
system can be programmed from one to five presses. The
default setting is
oonnee
press.
note: Because many states have laws regulating security
systems, programming NPC® off may cause your system
to violate state laws.
note: This feature will only function if the Failsafe®
Starter Kill relay has been installed.
To Next Page
Loading...
