Need help?Do you have a question about the Clifford MATRIX 1X and is the answer not in the manual?
Button used to arm the system.
Button used to disarm the system.
Button used to activate the panic feature.
Display screen on the remote control.
Icons showing communication status with the vehicle.
Icons indicating alarm, Warn Away, or triggered zones.
Icons showing if the system is armed or disarmed.
Indicator for the remote's battery charge level.
Button functions for arming, disarming, and panic.
Controls Silent Mode and Auxiliary Outputs 2 and 3.
Controls vehicle selection and LCD response.
Visual indicators for remote battery charge level.
Steps for replacing the remote's battery.
Information regarding warranty registration and proof of purchase.
Describes standard button configurations for remotes.
Controls the arming function.
Controls the disarming function.
Controls Silent Mode and auxiliary functions.
Controls the panic feature.
Activates convenience or expansion functions.
Selects vehicle and configures LCD response.
Icons showing communication status with the vehicle.
Icons indicating alarm, Warn Away, or triggered zones.
Icons showing if the system is armed or disarmed.
Icons for ignition, vehicle number, and door status.
Icons for trunk alarm, shock sensor status, and battery level.
Icons indicating vibrate mode, ignition status, and selected vehicle.
Icons showing door status and system arm/disarm states.
Page received after sending a command to confirm receipt.
Page received when the alarm is triggered while armed.
Procedure to clear page alerts and notifications.
Notification received when the remote is out of range or on the wrong vehicle.
Steps to enter the remote's programming mode.
Settings to configure beep and vibration feedback.
Settings to control the LCD backlight illumination.
Settings to enable or disable audible page notifications.
How the remote exits programming mode.
How to arm the system using the remote.
Basic arming with one siren chirp.
Bypassing zones 2, 4, or both for increased security.
How to start and cycle through different arming levels.
Where the Valet button is located for system access.
The required number of Valet button presses for disarming.
Dome light activates after system disarm.
Dome light activates after ignition is turned off.
Dome light activates after door closure.
Dome light activates after door, ignition, or security disarm.
How to activate Panic Mode using the LCD remote.
How to activate Panic Mode using the 4-button remote.
Steps to enter or exit Valet Mode using the ignition and Valet button.
Steps to enter or exit Valet Mode using the remote transmitter.
Explains bypass notification during arming.
Explains tamper alert and FACT II indicators during disarming.
Table detailing siren chirp patterns and their meanings.
Option to enable/disable panic with ignition on.
Option to enable or disable forced passive arming.
Option to enable or disable automatic engine disable feature.
Setting for the duration of the full triggered sequence.
Information on disabling FACT II and its implications.
Settings to disable automatic window closure and forced passive arming.
Prevents Panic button activation with ignition on.
Option to enable or disable progressive door trigger response.
Number of Valet button presses for system disarming.
Customization options for siren tones and volume.
Unlocks only the driver's door on disarm, or all doors on second press.
Anti-carjacking device for safe vehicle recovery.
Describes the sequence of events when the VRS is triggered.
Procedure to disarm VRS before the triggered sequence starts.
Procedure to disarm VRS once the triggered sequence has begun.
Detects glass breakage and impact sounds.
Maintains system power if main battery is disconnected.
Creates an invisible coverage zone to detect intrusions.
Controls garage doors with the remote.
Automates parking and headlights based on darkness or wipers.
Remotely operates the vehicle's trunk or hatch.
Provides automatic power window control.
Protects the vehicle from being lifted.
Definitions for Control Unit, LCD, Siren, and Status LED.
Definitions for Fail Safe Starter Kill and Shock Sensor.
Definitions for ASK and Input.
Definitions for Transmitter, Valet Button, and Warn Away Response.
Definitions for Trigger/Sequence and Zone.
To Next Page
General
