Need help?Do you have a question about the Clifford Matrix RS2 and is the answer not in the manual?
General| Number of Buttons on Remotes | 4 |
|---|---|
| Range | Up to 1 mile |
| Remote Control | Yes |
| Shock Sensor | Yes |
| Starter Kill | Yes |
| Door Trigger | Yes |
| Hood Trigger | Yes |
| Trunk Trigger | Yes |
| Valet Mode | Yes |
| Panic Mode | Yes |
| Warranty | Limited Lifetime |
Critical safety warnings and precautions for system installation and operation, emphasizing ventilation and proper use.
Essential pre-installation steps and general advice for a successful system setup.
Procedure for locating and testing the vehicle's tachometer wire using a multimeter.
Method for identifying the wait-to-start bulb wire in diesel vehicles for proper system connection.
Procedure to verify the neutral safety switch function, ensuring the vehicle cannot start in gear.
Details on Passlock I and II systems, common in GM vehicles, and bypass requirements.
Installation and wiring instructions for the plug-in LED indicator, including mounting hole specifications.
Guidance on connecting the Valet/Program switch for accessibility and function.
Explains the function and setting of the digital tach filter jumper for signal learning.
Details on configuring a 4-button transmitter using Channel 8 for specific system functions.
Lists and describes basic system features configurable via the Valet/Program switch or Bitwriter.
Details advanced system features that can be programmed, covering various operational aspects.
Common issues and solutions related to the alarm system's functionality and sensor triggers.
To Next Page