Need help?Do you have a question about the ClimateMaster CM300 Series and is the answer not in the manual?
General| Category | Thermostat |
|---|---|
| Series | CM300 |
| Power Source | 24 VAC |
| Dehumidification Control | Yes |
| Display | LCD |
| Programmable | Yes |
| Backup Heat Control | Yes |
| Humidity Control | Yes |
| Wireless Capability | No |
| Stages | 2 Heat / 2 Cool |
| Compatibility | Geothermal |
| System Mode | Heat, Cool, Auto, Off, Emergency Heat |
Steps for removing the old thermostat, wiring, and backplate installation.
Details on connecting wires and the thermostat backplate.
Instructions for configuring system settings via dip switches.
Wiring diagrams for various system types (gas/elec, heat pump).
Steps for configuring Wi-Fi and integrating with the Skyport account.
How to view Wi-Fi status and join an existing Skyport account.
Explanation of the thermostat's front panel buttons.
Details on what the thermostat display shows, including modes and icons.
How to set desired temperature and humidity levels.
Functionality and usage of the override button for temporary setting changes.
Configuring time, day, programming, and backlight options.
Setting limits, deadbands, and fan operation parameters.
Step-by-step guide to setting up daily heating and cooling schedules.
Explains deadband control and how to use emergency heat.
Procedures for calibrating the sensor and resetting to factory defaults.
To Next Page
