Need help?Do you have a question about the Climax CTC-1052 and is the answer not in the manual?
Details on buttons, LEDs, SIM card slot, microphone, and speaker.
Explains the AC power adapter, rechargeable battery, and battery switch.
Instructions for inserting the SIM card into the CTC-1052 panel.
Guidance on selecting a location and mounting the control panel.
Information about the SMS Editor tool for remote programming.
Step-by-step guide to learn-in the first pendant device.
Step-by-step guide to learn-in the second pendant device.
Instructions for removing learned pendant devices.
Explains the two available modes for programming the CTC-1052.
Details how to enter and execute programming commands using DTMF.
Details functions ready for execution when the CTC-1052 is in Idle Mode.
Describes the process when an alarm is triggered and the Guard Time Delay.
Procedure to determine the operation range of devices using Learning Mode.
Instructions for testing the complete system's functionality.
List of Contact ID event codes and their meanings for system events.
List of Tunstall event codes and their corresponding system events.
List of Scancom event codes and their associated system events.
Comprehensive list of DTMF commands for CTC-1052 configuration.
Table detailing SMS commands for remote configuration of CTC-1052.
General| Tamper Protection | Yes |
|---|---|
| Detection Range | Up to 12 meters |
| Battery Life | Up to 3 years |
| Wireless Frequency | 433 MHz |
| Power Supply | Battery |
To Next Page
