Page 13
5- OPERATION
CWS Basic 121-161-201-251
5.1 Start from the main control box
Turn the "Mode" switch installed on the main control box of the
system CWS Basic on the "Heat" or "Cool".
The system will begin to run and also the compressor.
5.3 Pumps
Pumps start when the main "Mode" switch is turned to the
"Cool" or "Heat" position.
IMPORTANT: Both pumps keep running even when the compressor is
stopped by the thermostat.
5.3 Stop from the main electrical box
Turn the "Mode" switch to the "Off" position.
To Next Page
Loading...