Clinique Sonic System - Operating Instructions; Preparing and Charging the Device

5
Operating Instructions
Preparing For Use
Allow Cleansing Brush to charge for at least 24 hours before first
use.
Beforeinitialuse,carefullyunpackyourCliniqueSonicSystemand
remove all packing materials. See illustrations showing the important
parts of the Clinique Sonic System.
HoldBrushHead,angledtipfacingup,sothatitalignswiththeround
diskonthehandle.GentlybutrmlypresstheBrushHeadontothe
round disk until you hear a “click.”
Tocharge,placetheChargingBaseonadry,hard,atsurfaceneara
properly functioning wall-outlet receptacle with the proper voltage rating.
UnfoldtheUSBcable-and-plugtoitsfulllengthandinsertthepluginto
USBportinthedirectplug-inwalladaptor.Insertplugofadaptorinto
the properly functioning wall socket.