PLAYBACK ON HEIMDALL
Wireless / MultiRoom (WHA)
5. To cancel MultiRoom (WHA) mode press the MultiRoom (WHA)
button on HEIMDALL or in the Clint App. The front top LED will
change to purple to indicate single mode.
6. MultiRoom (WHA) mode will also be cancelled if a music stream
from another device overrules.
7. Using AirPlay will automatically cancel the MultiRoom (WHA) mode
for the actual device. If the device is a MASTER then all SLAVE’s will
also be cancelled and returned to single mode.
23
PLAYBACK ON HEIMDALL
Music Direct (Wireless)
Your music devices can also connect to HEIMDALL using Music Direct.
This can be an advantage if HEIMDALL is located in a place without
Wi-Fi but wireless playback is still desired.
1. Press and hold the “Wi-Fi Setup” button on HEIMDALL for 4-5
seconds until the front top LED ashes purple rapidly and the four
white LED’s are solid.
2. Search for available Wi-Fi networks on your device (We refer to the
user guide of the specic product).
3. Find “Clint | HEIMDALL” on the list of available networks and
connect with it.
4. Choose HEIMDALL as output device.
5. You can now play music directly from your device to HEIMDALL.
Music Direct (Wireless):
24
Note: Volume control in MultiRoom (WHA) mode will only affect volume
on the MASTER. Volume on SLAVE’s needs to be controlled manually or
via Clint App.
Note: SLAVE’s will be forced back to single mode once a MASTER is
“removed/disappear”. They cannot act as SLAVE without a MASTER.
Note: To release HEIMDALL from the Music Direct mode, press the
“Wi-Fi Setup” button once. HEIMDALL will return to its previous state.
To Next Page
Loading...
General