Clipper TT 180 BM - Technical Data

VERS. 2017.06.01 TT 180 BM _MAN_EN
7
Frame (1)
The frame is made of steel to ensure perfect rigidity. It supports the motor, the cutting table and the
switch.
Cutting table (2)
Zink coated steel top for an excellent corrosion resistance.
Electrical Motor and switch (3)
Motor with 550W. The ON-OFF switch also serves as emergency stop.
Guide-a-cut (4)
The guide-a-cut can be adjusted to the desired cutting width. It is locked using two screws. A guide
to make mitre cut is also supplied with the machine.
Bevel cut (5)
You can make bevel cuts with the machine by loosening the two screws on the side and pivoting the
table.
Blade protection (6)
To avoid water projection, and protect the operator from the blade, a guard encloses the blade.
2.4 Technical Data
Electric motor
550W
Voltage
230V
Protection rating
IP 44
Max. blade diameter
180 mm
Bore
25,4 mm
Rotation speed of the blade
2950 min
-1
Flange diameter
50 mm
Cutting depth mm
34 mm
Sound pressure level
72 dB (A) (ISO EN 11201)
Sound energy level
80 dB (A) (ISO EN 3744)
Table dimension (LxW)
395 x 385 mm
Machine dimensions (LxWxH)
440 x 390 x 230 mm
Weights
Machine cpl.
11 kg
Ready for use (with water)
14 kg