Clipper TT 180 BM - Vibration Emission Statement

VERS. 2017.06.01 TT 180 BM _MAN_EN
8
2.5 Statement regarding the vibration emission
Declared value of vibration emission following EN 12096.
Machine
Model / code
Measured value of vibration
emission at m/s
2
Uncertainty K
m/s
2
Tool used
Model / code
TT 180 BM
230V
70184625699
<2.5
0.5
Clipper CLASSIC
CERAM
TT 180 BM
230V UK
70184626958
<2.5
0.5
Clipper CLASSIC
CERAM
TT 180 BM
110V UK
70184628690
<2.5
0.5
Clipper CLASSIC
CERAM
 The vibration value is lower and does not exceed 2.5 m / s.
 Values determined using the procedure described in the standard EN 12418.
 The measurements are made with new machines. Actual values may vary with site conditions, in
terms of:
 Materials worked
 Wear Machine
 Lack of maintenance
 Inappropriate tool for application
 Tool in poor condition
 Unskilled operator
 Etc…
 The exposure time to vibration is based on the performance of work (related to the adequacy
Machine / Tool / worked material / operator)
When evaluating risks due to hand-arm vibration, you need to take into account effective usage at
rated power of machine during a full day of work; quite often you will realise that effective utilisation
time represents around 50% of overall duration of work. You have to consider, of course, breaks,
water feeding, preparation of work, time to move the machine, disk mounting…