Need help?Do you have a question about the ClipperCreek LCS-20 and is the answer not in the manual?
Basic electrical safety precautions for using the LCS, including cable placement and avoiding user servicing.
Guidance on connecting the LCS to power, including circuit breaker ratings and receptacle types.
Rules and cautions for connecting to 3-phase power, including delta and wye configurations.
Warning to turn off power at the circuit breaker before plugging in or wiring the unit.
Instructions for mounting the LCS on hollow walls using appropriate anchors and structural support.
Instructions for mounting the LCS on solid surfaces like concrete or brick using anchor hardware.
Requirements for grounding the hardwired LCS using a grounded wiring system or equipment-grounding conductor.
Details on line input power, voltage range, frequency, and supplied service conductors.
Details of ClipperCreek's 3-year parts and factory labor limited warranty for the product.
Information on what the warranty does not cover, including improper installation and consequential damages.
General| Output Power | 3.8 kW |
|---|---|
| Connector Type | SAE J1772 |
| Enclosure | NEMA 4 |
| Maximum Output | 16 A |
| Mounting Type | Wall Mount |
| Enclosure Rating | NEMA 4 |
| Warranty | 3 Years |
| Input Voltage | 208-240 VAC |
| Cable Length | 25 feet |
| Input Current | 20 Amps |
| Operating Temperature | -30 to 50 °C |
To Next Page
