Need help?Do you have a question about the CLIVET EVH-X SPACE 5.1 and is the answer not in the manual?
General| Model | EVH-X SPACE 5.1 |
|---|---|
| Cooling Capacity | 5.1 kW |
| Heating Capacity | 5.6 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R32 |
| Noise Level (Outdoor) | 52 dB |
| Type | Split System |
| Power Supply | 220-240V / 50Hz |
Advises disabling the unit and contacting certified assistance service.
Explains serial number details and how to request assistance.
Covers hydraulic design, water quality, freezing protection, flow rate, and pressure.
Recommends installing a water filter with specific mesh pitch, accessible for cleaning.
Instructions for accessing the compressor compartment and connecting the pressure transducer.
Step-by-step instructions for preparing and starting the unit's hydraulic system.
Operations should be done by qualified technicians; agree on start-up date with service center.
Combines preliminary checks, refrigerant, water, and electrical circuit preparation.
Checks for scroll compressor, voltage/temperature, and remote controls.
Covers panel, buttons, and basic functions like mode, fan, and setpoint control.
Details unit status, lists alarms, and covers installer parameter configuration.
Covers guidelines, inspection frequency, record-keeping, and reset after inactivity.
Details cleaning procedures for water exchanger, filters, and condensate path.
Provides a table of recommended periodic checks for various components.
Covers general risks, danger zones, handling, installation, and electrical component hazards.
Details risks associated with electrical, moving, refrigerant, and hydraulic parts.
To Next Page