To Next PageTo Next Page
Need help?Do you have a question about the CLIVET ELFOROOM 5 and is the answer not in the manual?
General| Brand | CLIVET |
|---|---|
| Model | ELFOROOM 5 |
| Category | Air Conditioner |
| Language | English |
Provides core instructions for unit installation, use, and maintenance.
Essential safety rules for using electrical and water-based products.
Guidelines for safe handling and transport of the unit.
Specifies required spaces for unit operation and maintenance access.
Recommendations and restrictions for optimal unit placement.
General notes and considerations for the unit installation process.
Step-by-step instructions for installing the unit horizontally or on the ceiling.
Step-by-step instructions for installing the unit vertically.
Specifies the required pipeline diameters for water connections.
Guidelines and procedures for making hydraulic line connections.
Instructions for proper condensation drainage and setup.
Detailed steps for filling the hydraulic system correctly.
Step-by-step instructions for making electrical connections to the unit.
Explains the built-in thermostat's display, keys, and basic functions.
Explanation of various alarm codes and their potential causes.
Explanation of alarm codes and their meanings for the 4-speed control.
Operation of HID-T2/T3 thermostats, including set point and mode selection.
Explanation of alarm codes and their meanings for HID-T2/T3 thermostats.
Operating modes and settings for the HID-Ti2 thermostat.
Explanation of alarm codes and their meanings for the HID-Ti2 thermostat.
Lists common anomalies, their causes, and recommended remedies.
General overview of potential residual risks.
Identification of the danger zone within the unit accessible to operators.
Risks associated with handling the unit, including tipping and damage.
Risks related to incorrect unit installation, such as leaks or electric shock.
Common risks like smoke, unusual smells, and contact with components.
Risks associated with electrical components, wiring, and earthing.
Risks related to moving parts such as fans and transmissions.
Risks associated with hydraulic components, leaks, and water projection.
