Need help?Do you have a question about the CLIVET WiSAN-YSE1 12.1 and is the answer not in the manual?
Follow safety regulations, use protective gear, and read manual instructions for correct operation.
Follow storage instructions and handle unit carefully using appropriate PPE.
Comply with regulations; consider space, access, connections, and environmental factors.
Ensure adequate space for operation, maintenance, and proper unit placement.
Design piping to minimize pressure drops and ensure optimal system performance.
Ensure water quality meets standards and system is clean before connection.
Protect unit and connections from freezing using glycol, heating, or drainage.
Follow regulations; ensure correct line characteristics and protection devices.
Checklist for essential steps before powering the unit off.
Checklist for essential steps after powering the unit on.
Overview of the control panel layout and button functions.
How to set the operating mode and desired temperature.
Configure and enable domestic hot water production through the interface.
List of alarm codes, descriptions, and unit protection modes.
Ensure safe work area, follow procedures, and check for refrigerant presence.
Prevent ignition sources, ensure ventilation, and check electrical components.
Perform cooling equipment checks and safe repair of sealed components.
Use proper leak detection and follow procedures for refrigerant removal and evacuation.
Follow safe practices for charging operations, including pressure testing.
Follow safe dismantling procedures and label equipment properly.
Adopt good practices for recovery, transfer, transport, and storage of refrigerants.
Adhere to safety warnings and prepare for maintenance tasks.
Identify general risks and potential hazards during unit handling.
Address risks associated with incorrect installation and electrical connections.
Mitigate risks from moving parts and refrigerant exposure.
Master unit control logic, DHW provision, and electrical connections.
Details on Modbus protocol, speed, data bits, parity, and stop bits.
Performance data for Premium models with compressor soundproofing.
Performance data for Premium Super Silenced models: radiant panels and terminal units.
Chart showing operating ranges for cooling mode based on water and air temperatures.
Chart showing operating ranges for heating and DHW production.
To Next Page
General