Need help?Do you have a question about the CLIVET WiSAN-YME 1 S 6.1 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Model | WiSAN-YME 1 S 6.1 |
| Cooling Capacity | 6.1 kW |
| Heating Capacity | 6.5 kW |
| Power Supply | 230V/1Ph/50Hz |
| Energy Efficiency Ratio (EER) | 3.2 |
| Coefficient of Performance (COP) | 3.6 |
| Refrigerant | R410A |
| Weight | 85 kg |
Details general safety rules, required PPE, and trained personnel for safe operation.
Outlines conditions the installation site must meet for proper outdoor installation.
Safety precautions for handling the unit and steps to remove its packaging.
Lists conditions the installation site must meet for proper setup.
Details standard installation and specific considerations for strong winds, sunlight, rain, or snow.
Instructions for assembling the unit on the ground or mounting it on a wall.
Measures to prevent ice formation in the water circuit, including glycol usage.
Guidelines for minimum water volume and controlling expansion tank pressure.
Essential warnings and general precautions for electrical wiring.
Detailed precautions before making electrical connections.
Detailed initial settings for DHW, Cooling, Heating, and Automatic modes.
Detailed list of operational parameters for installer or technician use.
Safety warnings and procedures for servicemen, including refrigerant handling and electrical safety.
Recommended annual maintenance checks and procedures for glycol systems.
Guides for diagnosing and correcting common unit problems and error codes.
To Next Page
