Need help?Do you have a question about the CLIVET WiSAN-YME 1 S 5.1 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Heating Capacity | 5.6 kW |
| Refrigerant | R32 |
| Model | WiSAN-YME 1 S 5.1 |
| Noise Level (Outdoor Unit) | 52 dB(A) |
| Operating Temperature Range (Heating) | -15°C to 24°C |
Operate in compliance with safety regulations and use appropriate personal protective equipment.
Covers risks associated with installation, startup, maintenance, and repair by inexperienced personnel.
Details the refrigerant type (R-32) and its physical characteristics.
Highlights the flammability risk of the refrigerant and necessary precautions.
Specifies operating temperature ranges and measurement guidelines.
Specifies conditions for the installation site to ensure proper operation and safety.
Provides clearance and spacing requirements for standard unit installation.
Recommendations for installing the unit in areas exposed to strong winds.
Guidance on protecting the unit from direct sunlight, rain, and snow.
Instructions for ground mounting and dimensions for fixing.
Details on available kits for securing the unit to a wall.
Explains the necessity of frost protection and methods for prevention.
Guidelines for managing water volume and expansion tank settings.
Step-by-step instructions for filling and topping up the water system.
Essential safety precautions before making electrical connections.
Provides detailed wiring specifications and connection diagrams.
Details connections for various terminal blocks and other interface components.
Guidance on installing and operating the user interface.
Introduction to the user interface and its keypad functions.
Procedure for initial unit start-up and system language selection.
Details functions accessible only by authorized technicians via password.
Configuration options for Domestic Hot Water (DHW) mode.
Configuration parameters for the unit's cooling mode operation.
Configuration parameters for the unit's heating mode operation.
Configuration parameters for automatic heating and cooling modes.
Lists error codes, their meanings, and corrective actions.
Register map for unit alarms, malfunctions, and protections.
Register definitions for unit alarms and error codes.
Safety checks and procedures for electrical components.
Procedures for refrigerant removal, charging, and safe disposal.
Presence of fire extinguishers and safety checks for electrical devices.
Procedures for refrigerant recovery, transport, and labelling.
Safe procedures for refrigerant removal and charging operations.
Common issues like no heating/cooling and their corrective actions.
List of error codes, their causes, and reset procedures.
Troubleshooting for compressor not starting in heating or DHW modes.
To Next Page
