Need help?Do you have a question about the CLIVET WiSAN-YME 1 S 3.1 and is the answer not in the manual?
Lists essential conditions for the installation site, ventilation, safety, and access for maintenance.
Explains the necessity of preventing ice formation and the use of antifreeze liquids, including concentration guidelines.
Essential safety guidelines, general precautions, and earthing requirements for electrical connections.
Covers power supply connection precautions, wiring diagrams, specifications, and terminal blocks.
Covers water and electrical connections, configuration, and backup master setup for cascade systems.
Guides on initial unit setup, UI operation, language selection, menu navigation, technician functions, and terminology.
Details technician-required initial settings for DHW, Cooling, Heating, Auto modes, and control strategies.
Explains Zone Thermostat setup and configuration parameters for additional heating sources like boilers and heaters.
Details special functions like floor preheating/drying and testing procedures for unit components and modes.
Covers automatic restart, power limits, input signals, cascade settings, and HMI address configuration.
Details DHW functions including Disinfect, Fast DHW, Tank Heating, and DHW recirculation pump configuration.
Provides access to service information, error codes, unit parameters, and display settings for diagnostics and configuration.
Details the Operation Parameters menu used by installers to check and configure various unit operational settings.
Outlines essential annual maintenance checks to be performed by a technician for optimal unit availability and safety.
Details annual checks for glycol concentration/pH and flow switch procedures for system integrity.
Lists error codes, their malfunctions, causes, and corrective actions for identifying and resolving unit faults.
To Next Page
General