CLIVET WSAN-XEE Series User Manual

M6G240F7-02 14/03/08 pag 6
TO DO FOR
Start the unit possible also by external enabling ( see ELECTRICAL CONNECTIONS )
LONG pressing of the ON/OFF button
A
L
ARM
S
T
A
TUS
SET
Choose the SUMMER mode possible also by external enabling (see ELECTRICAL CONNECTIONS)
“SNOW-FLAKE” button
ALAR
M
STATUS
SET
Choose the WINTER mode possible also by external enabling (see ELECTRICAL CONNECTIONS)
“FLAME” button
ALARM
STATUS
S
E
T
Limit the energetic consumption Control by external enabling (see ELECTRICAL CONNECTIONS)
ECO mode
Minimize the consumptions maintaining the system at a safety temperature in WINTER ( MAINTENANCE function )
Put the unit in OFF ( parameter 45 must be = 1 )
Minimize the consumptions maintaining the system at a safety temperature in SUMMER ( MAINTENANCE function )
Put the unit in OFF ( parameter 44 must be = 1 )
Modify the water temp. in HEATING Control parameter 33 Modify the water temp. in ECO heating Control parameter 30 Modify the water temp. in COOLING Control parameter 32 Modify the water temp. in ECO cooling Control parameter 29 Modify the water temp. in MAINTENANCE heating Control parameter 43 Modify the water temp. in MAINTENANCE cooling Control parameter 42 Enable (par=1) / disabled (par=0) the MAINTENANCE function
Par 44 SUMMER, par 45 WINTER
A
L
AR
M
STAT
U
S
SET
SET button
A
L
AR
M
STAT
U
S
SET
Scroll the
parameters
A
L
AR
M
STAT
U
S
SET
Modify the
parameter
A
L
AR
M
STAT
U
S
SET
Back to the main menu

CLIVET WSAN-XEE Series Specifications

General

Brand	CLIVET
Model	WSAN-XEE Series
Category	Heat Pump
Language	English