What to do if water drips from the faucet of my Clover D14A Water Dispenser?
If water drips from the faucet of your Clover Water Dispenser, press down the faucet lever several times. If the dripping continues, the faucet body packing and spring may be defective, requiring replacement of the faucet assembly.
What to do if water drips from dual float valves assembly of my Clover Water Dispenser?
If water drips from the dual float valves assembly of your Clover Water Dispenser, the dual float valves elbow union may be defective and needs replacement. Alternatively, the dual float valve’s packing might be defective, or the cold water piping is defective. Replace the dual float valves packing and properly connect or replace the cold water piping.
Explains the refrigeration cycle and how the system cools water by absorbing heat.
Details how the electric heater within the hot water tank heats the supplied water.
Covers common problems like compressor not running, inadequate chilling, or slow water flow.
Addresses problems such as no hot water, insufficient temperature, or noisy hot tank.
Details how to diagnose and resolve excessive noise emanating from the water cooler.
General| Model | D14A |
|---|---|
| Category | Water Dispenser |
| Cooling System | Compressor |
| Voltage | 220V |
| Power Consumption (Heating) | 500W |
| Color | White |
| Water Temperature | Hot, Cold |
| Capacity | 5L |
| Weight | 14.8 Kg |
To Next Page
