This guide provides information for getting started
with the Clover Flex.
The Clover Flex includes:
> Clover Flex Quick-Start Guide
> Charging cradle
> Power cable
> Receipt paper
> Screwdriver
> Pre-installed SIM card
Setting Up the Clover Flex
After unboxing your Clover Flex, follow these steps to get everything setup:
1. Connect the power cable to the charging cradle.
2. Place the Clover Flex on the charging cradle.
3. Press and hold the power button until the Clover logo is displayed.
4. The device will turn on and display a welcome screen. Select a languge.
5. On the ‘Connect to network’ screen, configure the device's network connection:
a. To connect to a Wi-Fi network, tap ‘Configure’ next to the Wi-Fi option,
and select your network. PCI Compliance standards require the device to
connect to a secure, password protected network.
b. To connect to an LTE network, tap ‘Configure’ next to Mobile (SIM card).
The device displays ‘Successfully Connected to Server’ upon connecting.
6. Click ‘Next’ to proceed. The device will now download and install the Bolt App.
a. Once complete, the Bolt App launches and displays the Terminal
Registration screen.
7. Continue to Activation Workflow Clover Mini for more information.
Bolt On Clover Flex
Unboxing the Clover Flex
To Next Page
Need help?
General
