IMPORTANT for UK Power Adapter Cord
If the available socket outlet is not suitable for the plug supplied with this equipment, it
should be cut o and an appropriate three pin plug itted. With alternative plugs on ap-
proved 3 amp fuse must be itted in the plug or adaptor or in the main fuse box.
The plug severed from the mains lead must be destroyed, as a plug with bared lexible cords
is hazardous if engaged in a live socket outlet. In the event of replacing the plug fuse, use a
3 amp fuse approved by ASTA to BS 1362, i.e. carries the mark. Always replace the fuse
cover, never use plugs with the fuse cover omitted.
WARNING — THIS APPLIANCE MUST BE EARTHED.
The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow = Earth Blue = Neutral Brown = Live
As the colour of the wiring in the mains lead of this appliance may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
• The wire which is coloured Green-and-Yellow must be connected to the terminal in the plug
which is marked with the letter “E”, or by the earth symbol or coloured Green-and-Yellow.
• The wire which is coloured Blue must be connected to the terminal which is marked with
the letter “N” or coloured Black or Blue.
• The wire which is coloured Brown must be connected to the terminal which is marked
with the letter “L” or coloured Red or Brown.
Argentina
Este producto utiliza para su funcionamiento
una fuente de alimentación, modelo FSP040-RHBN3
marca Clover con las siguientes características
técnicas: Entrada: AC 100-240 V, 50-60 Hz, 1.5 A, Cl. I;
Salida: DC 12 V, 3.33 A, que ha sido certiicada para su
utilización en el mercado argentino.
Conectar una fuente
diferente a la provista podría
ocasionar un incendio o
choque eléctrico. No utilice
una fuente diferente a la
provista con el equipo.
To Next Page
Loading...
Need help?
General
