Matrix K User's Manual 17
Control Panel of Matrix K FW
There are 6 pages in Matrix K FW control panel. But there are only 2 pages, “Synchronisation”
and “ Settings”, related to setting and control. Other pages are providing device information to
users.
Synchronisation tag
Users set the sampling rate of WDM driver mode of Matrix K FW in this page. The supported
sampling rates are 44.1, 48, 88.2, 96, 176.4 and 192KHz. It is not necessary to set sampling
rate in ASIO driver mode. The sampling rate of Matrix K FW will sync to ASIO driver setting
automatically.
Settings tag
Users set the buffer size of ASIO or WDM driver here. Adjust those buffer size settings once
any pops happen while playback or recording, and eliminate pop noise.
To Next Page
Loading...