CME Matrix K - Configuration; Front Panel

Matrix K User's Manual 7
Congurations
Front Panel
Matrix K front panel has all of the input gain and output volume control knobs, and the
switches for direct monitor, phantom power and guitar signal. Below is the detail of Matrix K
front panel.
1. XLR / TS combo connector
You can connect a microphone or electrical guitar here. The XLR input is balanced and
provides 48V phantom power (by pressing the “48V On / Off” button). It is suitable for
professional condenser microphones. The ¼” connector is un-balanced and is suitable for
dynamic coiled microphone and electric guitar or bass.
2. Mic / Guitar In
Adjusts the gain of the signal from the combo connector.
3. In Peak
After activating “Direct Monitor” function. A red LED ashes when the input signal level is
near distortion indicating it would be better to lower the input gain.
4. In Level
After activating “Direct Monitor” function. A blue LED will light up and ash if signal is
available at the input channel.
5. Stereo In Vol.
Adjusts the volume level of the Stereo In.
6. Line Out vol.
Adjusts the volume level of Line Out.
7. Head Phone Vol.
Adjusts the volume level of Head Phone 1 and Head Phone 2.
8. Head Phone 1
The rst headphone output connector (stereo).