CME Matrix K - Specifications; PC System Requirement

Matrix K User's Manual
22
Specications
◎
External IEEE1394 (Matrix K FW) or USB (Matrix K USB) audio system
◎
1 IEEE1394 jack (for Matrix K FW) or USB jack (for Matrix K USB)
◎
Digital signal accessing up to 24-bit/192KHz (Matrix K FW) or 24-bit/48KHz (Matrix K
USB)
◎
ASIO 2 support for Windows (only for Matrix K FW)
◎
WDM and MME driver support for Windows
◎
CoreAudio support for MAC OS X
◎
1 “Stereo In” to receive external line level signal (un-balanced, 1/8” TRS)
◎
Stereo “Line Out” with volume control for connecting active speakers (2 balanced, 1/4”
TRS)
◎
2 Stereo headphone outputs with volume control (1/4” and 1/8" stereo TRS for each)
◎
1 “Mic / Guitar In”, with a XLR and TS combo connector that microphone and electric
guitar/bass share and a gain control knob
◎
XLR of combo connector is balanced, TS is un-balanced
◎
2 input signal LEDs (blue, one for each channel), indicate if there is any signal available
at the input channel
◎
2 input peak LEDs (red, one for each channel), indicate if an input signal is near
distortion
◎
48V phantom power with switch (press button), provides power to XLR only
◎
1 phantom power LED (green) indicates the status of phantom power supply
◎
1 “Direct Monitor” button toggles the input signal between direct monitoring of the input
or the sound card output
◎
1 “Guitar On / Off” button turns on “Mic / Guitar In” function in front panel
PC system requirement
PC system requirement
◎
Intel Pentium III 800 or same performance CPU of AMD
◎
256MB RAM
◎
IEEE1394 and USB connector
◎
Windows XP with ServicePack 1
Recommendation PC system
◎
Intel Pentium 4 2GHz or AMD Athlon XP2000+
◎
512MB RAM
◎
IEEE1394 and USB connector
◎
Windows XP with ServicePack 2