Troubleshooting
- 11 -
7.3. SD and MMC card reader
Extend your system by inserting a SD or MMC memory card in
the card reader.
Do not disconnect the device when „SD“ mode is
selected.
1. Insert the SD or MMC card in the card reader.
2. Set the function switch to MP3/CD.
3. Press the STOP/SD button until “SD” is displayed.
4. Press the PLAY button to start playback.
To avoid damage only disconnect the device after
pressing the STOP button and selecting a different mode
with the function selector.
8. Troubleshooting
Contact the service hotline or use the contact form on the
homepage in case of problems with the system that are not dealt
with here.
Malfunction Solution
„No disc“
Insert a CD.
Insert a finalized CD-RW or CD-R.
Insert a CD with the label up.
To Next Page
Loading...
