Connections
Version 1 cmx® MSC 7320 Seite 10 von 16
Set the function switch to “AUX”.
Make sure that the speakers are connected to the main unit.
Switch on the power of the external device (eg. MP3 player).
Start playback of the external device and adjust the volume
control of the main unit to the desired level.
Remember to switch off the unit when you are finished using
the external device.
4.4. Headphone
To connect the headphones or earphones insert the cable
into socket on the rear of main unit (see point 1 – location of
controls / rear side).
To Next Page
Loading...