CD player
Version 1 cmx® MSC 7320 Seite 13 von 16
00
PROG RAM
01
Press the “NEXT/BACK” keys to select the track (song)
number you wish to be stored in the first memory (program)
position and press the “PROGRAM” key to confirm your
selection.
When you press “PROGRAM” the display will advance to
the next memory position number.
Repeat the previous 2 Steps, each time selecting any track
number of your choice to be stored in the successive
memory (program) positions.
After each track number, remember to press the
“PROGRAM” key.
After a maximum of 20 songs (or less) have been selected
as described above, press the “PROGRAM” key.
Also, the “Program” symbol will remain “on” to indicate that
you have saved a program-memory (sequence).
Pressing “PLAY/PAUSE” key will now play back the “saved
sequence” in the program memory.
Pressing “NEXT/BACK” will move to the next or previous
song in the saved sequence.
To clear (cancel) the entire program which is stored in the
memory, simply press “STOP”, or switch off the set.
„PROGRAM“ symbol flashing
memory storage
position number
track (song) number (flashing)
To Next Page
Loading...