Connections
Version 1 cmx® MSC 7320 Seite 9 von 16
4. Connections
4.1. Power Supply
This set works on normal household AC-power.
Make sure the set voltage of unit matches your local voltage.
Insert the plug of the AC-cord into a wall outlet with AC-
power.
How to switch the unit “on”
To switch on the set, slide the function switch to “AUX”, “CD” or
“RADIO” as desired.
4.2. Speakers
Unwrap the speaker-cords of both speaker-boxes and insert
the left/right plugs into sockets in the rear of main unit
(see point 1 – location of controls).
Place the speaker-boxes as far apart as possible for best
sound effect.
4.3. AUX input
You can connect the audio output of an external device such as a
MP3 player to this unit, to listen to the sound of that device through
the high quality amplifier of this music system.
To connect the external device please use a standard stereo
headphone (3,5 mm to 3,5 mm plugs) cable to connect the
“headphone-out or audio line-out” of the device to the AUX-input
socket of this unit.
To Next Page
Loading...