CO/Tech E0201ST2H2 User Manual

5
ENGLISH
24
25
26
27
Sensorunit
24. LED indicator (flashes when data is
being sent to theweather station)
25. Wall mount eyelet
26. Channel selector
27. Battery holder
Installation
Batteries
Note: Usefresh, high quality alkaline batteries. Nevermix old and new batteries.
Change all batteries at thesametime. Nevercombine rechargeable batteries with
standard batteries.
Main unit
1. Fold out thetable stand (23) and locate thebatterycover.
2. Slide thebattery cover in thedirection of thearrow.
3. Observe themarkings on thebottom of thebattery compartment and insert
2×AAA/LR03 batteries.
4. Slide thebattery cover back on until it clicks intoplace.
Sensor unit
1. Slide sensor’s battery cover in thedirection of thearrow.
2. Observe themarkings on thebottom of thebattery compartment and insert
2×AAA/LR03 batteries.
3. Slide thebattery cover back on until it clicks intoplace.
Handytip: Thelow-battery indicator will show whenever thebatteries in either
theweather station or sensor start becoming low (14 and 16). Change batteries
in order to ensure thedevice’s continued uninterrupted performance.

CO/Tech E0201ST2H2 Specifications

General

Brand	CO/Tech
Model	E0201ST2H2
Category	Thermometer
Language	English