CO/Tech E0201ST2H2 - Display Backlight; Temperature Trend; Care and Maintenance

8
ENGLISH
Shutting off the alarm
Press any of thebuttons (10, 11 or 12) under thedisplay. Thealarm will then shut off
for thecurrent day and sound at theset time on thenextday.
Deactivating the alarm
1. Press the [ AL/SET ] button. “AL” will show on thedisplay.
2. Press [ MEM/▼ ] to activate thealarm. Thealarm icon (18) will then disappear from
thedisplay.
Display backlight
Press the [ SNOOZE/LIGHT ] (1) to turn thebacklighton.
Thelight will automatically go out after afew seconds.
Temperaturetrend
Thesymbols show thetemperature trend next to its respective reading (2 and 6).
Rising temperature
Falling temperature
Steady temperature
Max and min readings
1. Press [ MEM/▼ ] to view max temperature, humidity and barometric pressure
readings.
2. Press once to display all min readings.
3. Press again to return to current readings.
Resetting max and min readings:
1. Press [ MEM/▼ ] until themax or min readings show up on thedisplay.
2. Press and hold [ AL/SET ] to reset thereadings.
Care and maintenance
Clean theproduct using alightly moistenedcloth. Useonly mild cleaning agents, never
solvents or corrosive chemicals.