4
ENGLISH
Use
1. Plug the timer into a wall socket. The battery needs to be charged for 6 hours.
Unplug the timer from the wall socket if you are not going to use it for a long time.
2. If the display is totally clear, press in the RST button.
Setting the time
1. Press MENU and select time setting.
2. Press OK for about 3 seconds. The day of the week
starts to flash. Adjust the day using the +1 or -1 key.
3. Press OK. The hours setting starts to flash.
Adjust the hours using the +1 or -1 key.
4. Press OK. The minutes setting start to flash.
Adjust the minutes using the +1 or -1 key.
5. Press MENU to confirm.
Setting programmes
1. The timer can be set for daily or weekly programmes.
2. Up to 16 programmes can be set.
3. Use the MENU key to access programme 1 ON.
4. Use +1 and -1 to access the individual programmes 1–16.
5. Set the time for 1 ON and 1 OFF.
MO = Monday
TU = Tuesday
WED = Wednesday
TH = Thursday
FR = Friday
SA = Saturday
SU = Sunday
Setting a daily programme (example)
MO 08.15 ON / MO 15.45 OFF
1. Press MENU until you come to programme 1 ON.
2. Press OK once until day of week is flashing. Set the day using
the +1 or -1 key (e.g. MO).
3. Press OK, the hours will start flashing. Set the hours using the +1 or -1 key.
4. Press OK, the minutes will start flashing. Set
the minutes using the +1 or -1 key. See fig. 2.
5. Press OK, now “1 ON” starts flashing, use +1 to
set programme 1 OFF.
6. Set the 1 OFF time in the same way as for
the 1 ON time. See fig. 3.
NOTE: In order to be sure that the programme is
activated, “AUTO ON” or “AUTO OFF” must be
displayed in time display mode.
fig. 1
fig. 3
fig. 2
To Next Page
Loading...
General