EasyManuals Logo

CO/Tech EMT448ET User Manual

CO/Tech EMT448ET
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
6
ENGLISH
Note: To prevent programmes from overlapping, the time lag between two subsequent
programmes must be at least 33 minutes.
Manual switching
This timer allows you to manually switch connected loads on and off.
Press +1 in time display mode to select either:
• ON: Always switched on
• AUTO-ON: Switched on in programme
• OFF: Always off
• AUTO – OFF: Switched off in programme. See fig. 7.
Automatic return to time display
If no key is pressed for a duration of 2 minutes, the display returns to the time
display mode.
Summer / winter time
1. Press RCL. The hour display advances 1 hour and “+1 h” appears on the display
to indicate summer time.
2. Press RCL once more to display winter time again.
Care and maintenance
Wipe the product using a dry cloth as and when required. Never use solvents
or abrasive cleaning agents.
Disposal
Follow local ordinances when disposing of this product. If you are unsure of
how to dispose of this product, please contact your local authority.
Specifications
Programme 16×
Rated voltage 230 V AC, 50 Hz
Max load 3680 W, 16 A
Shortest operating time 1 minute
fig. 7

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CO/Tech EMT448ET and is the answer not in the manual?

CO/Tech EMT448ET Specifications

General IconGeneral
BrandCO/Tech
ModelEMT448ET
CategoryTimer
LanguageEnglish